top of page

Recent Floor Restorations

Every wooden floor has a story. Here are a few of the homes where we have brought the timber back to life, from century-old pine floorboards in North Chingford to walnut engineered flooring in Buckhurst Hill and parquet in Epping.

​

Take a closer look at the finished floors and the work behind them. These projects show how careful sanding, a considered choice of colour and the right finish can retain the character that makes a real wood floor worth keeping.

Close view of restored timber floorboards with natural grain and character

Stained pine floorboards in North Chingford

Two generations of pine floorboards shared this North Chingford kitchen and dining area. The original boards were over 100 years old, while the kitchen flooring dated from the 1960s. The challenge was to bring the two areas together without losing the grain, knots and character of the timber.

​

After sanding, I stained the boards to the customer's chosen mid-brown shade. This gave the floor a more consistent appearance across the room while allowing the differences in the wood to remain part of its character.

​

Three coats of Bona Mega matt floor lacquer completed the work. The photographs show the finished floor from the dining area through to the kitchen, alongside closer views of the colour and grain.

Walnut floor restoration in Buckhurst Hill

This Buckhurst Hill walnut floor presented a challenge that only became apparent once work had started. It looked like solid timber, and there was no accessible edge to check its construction. The initial sanding revealed an engineered floor with a walnut wear layer of around 1 mm.

​

We explained the risk of sanding through such a thin veneer, and the customer asked me to continue. It called for exceptionally careful sanding to remove the existing finish while preserving as much walnut as possible. The small areas where the veneer was compromised were repaired and blended into the surrounding floor.

​

The result was a floor that could be kept and enjoyed, with the varied colours and grain of the walnut still taking centre stage. The customer was very pleased. This was an individual salvage project: a thin engineered floor always needs a careful assessment before restoration is considered.

Parquet restoration in Epping

The appeal of parquet is in the detail: the pattern, the changing direction of the grain and the way the timber catches the light. This Epping restoration shows how much character an existing wood floor can bring to a room.

​

We restored the parquet and finished it with Bona Mega matt floor lacquer. The matt surface allows the timber's colour and the parquet pattern to remain the focus, without a high-gloss appearance.

​

These photographs follow the finishing work through to the completed floor. They offer a closer look at the result, from the individual blocks to the pattern across the room.

Elm and pine floor restoration in Gamlingay

Although Gamlingay is outside our usual Essex and East Hertfordshire service area, we took on this project following a recommendation from a previous customer.

​

This Gamlingay home had a floor with an unusual mix of timber and a very particular brief. Originally laid in elm, much of the floor had been replaced with pine over the years. The customer wanted to keep the curves and undulations of the boards, rather than have them sanded flat.

​

A conventional floor sanding machine has a flat drum, so a different approach was needed. We used a powerful Festool orbital sander to remove the existing finish while following the contours of the wood. This preserved the shape and character the customer valued.

​

Bringing elm and pine together presented a second challenge: the two timbers respond differently to stain. We stained and sealed the elm first, then mixed a separate stain for the pine, working towards the closest possible colour match across the floor. The aim was a more consistent overall shade while retaining the grain and individuality of both woods.

​

Once the colour matching was complete, we finished the entire floor with Bona Mega matt floor lacquer for a durable, soft sheen finish. The result looked fantastic, and the customer was delighted enough to leave us a glowing review on Google.

​

​The photographs show the finished floor, close views of the retained contours and grain, and the preparation work behind the result.

Oak floor restoration in Brentwood

A recommendation from a previous customer brought us to this characterful home in Brentwood, Essex. Parts of the house date back to the 15th century, with alterations made over the years. The solid oak plank flooring was a later part of that history and had seen better days.

​

The customer wanted a darker floor that would sit more comfortably with the decor. We mixed a water-based mid-brown stain and applied it throughout the ground floor, bringing a deeper tone to the oak while keeping its grain and natural variation visible.

​

Once the staining was complete, we sealed the floor and top-coated it with Bona Mega matt floor lacquer. The soft sheen complements the mid-brown colour and allows the detail of the oak to show through.

​

​The finished floor gives the ground-floor rooms a consistent colour, with the individual boards and grain still clearly defined. These photographs follow the oak through the rooms and doorways, showing both the overall result and closer views of the timber.

Solid oak floor restoration in Epping

This solid oak floor in Epping, Essex, needed more than a fresh finish. A small area of boards had lifted, leaving a void beneath them and allowing the floor to move when walked on. Before sanding could begin, we needed to deal with that movement and secure the raised boards.

​

We fixed the affected boards down with screws, countersinking each fixing so the screw head sat below the surface of the oak. The recessed holes were then filled and coloured to blend with the surrounding timber. This preparation eliminated the movement in the lifted area and left the floor ready for sanding.

​

With the repairs complete, we sanded the oak to remove the existing finish and prepare the surface for a clear, natural finish. The aim was to let the colour and grain of the wood remain the focus, with the repaired areas blending into the overall floor.

​

​We applied a shellac sealer followed by three coats of Bona Mega matt floor lacquer. The finished floor has a soft sheen that brings out the oak's character, with a durable protective finish for everyday use.

School hall parquet restoration in Waltham Abbey

This school hall in Waltham Abbey had an iroko parquet floor with plenty of character beneath its worn surface. The repeating blocks and varied grain are part of what makes a hardwood hall floor worth restoring, and the aim was to bring those details back into view across the whole room.

 

The work had to fit around the school calendar and was carried out during the holiday break. With the hall clear, we could work across the floor as one continuous area, sanding and refinishing the parquet to reveal the colour and grain of the iroko.

 

The finished hall shows the pattern clearly again, with the changing direction of the blocks catching the light across the room. It was a striking transformation on a large floor, completed within the school holiday window and with a very happy facilities manager. The photographs show the work through to the finished result.

Parquet floor restoration at Albany, Piccadilly.

This was a particularly unusual parquet floor, restored at Albany, just off Piccadilly in London. Its intricate geometric pattern combines contrasting strips and carefully arranged shapes, creating a floor whose detail rewards a closer look. Preserving that individual character was central to the work.

 

The parquet was formed from glued-down timber battens around 6 mm thick, so the restoration called for a delicate approach. Many battens had worked loose and needed to be carefully secured before the initial sanding. With such thin pieces, preparation and controlled sanding were essential to retaining the floor and its pattern.

 

Once the sanding was complete, we applied a grain-enhancing first coat to bring out the timber's colour and detail, followed by three coats of Bona Mega floor lacquer. The finished photographs show the contrast between the timbers, the fine lines within the pattern and the overall effect across the room.

 

The flat we restored was the former home of author J. B. Priestley. This home also appears in Oscar Wilde’s The Importance of Being Earnest.  Jack Worthing’s visiting card, under his London identity of Ernest, gives his address as “B4 The Albany”.

Pine floor restoration in Billericay

This pine hallway in a period home in Billericay, Essex, was restored to a natural finish. Sanding removed the worn surface and revealed the grain and knots of the boards.

 

We applied a Morrells isolating coat followed by three coats of Bona Mega floor lacquer, protecting the timber while keeping its natural pine colour. The work was completed within a day.

Douglas fir parquet restoration in Sawbridgeworth

This Douglas fir parquet floor in Sawbridgeworth was restored in two stages, allowing the decorating to be completed before each area was finished. The varied grain and warm colour give this parquet its individual character.

We sanded the floor to remove the old finish, then filled the joints and worked through the finer sanding stages to prepare an even surface for coating. Jenkins floor seal was applied before three coats of Bona Mega matt floor lacquer.

The finished floor brings the parquet pattern and the natural variation of the Douglas fir back into view, with a matt protective finish. The photographs show the preparation, the detail of the blocks and the completed rooms.

Georgian pine floor restoration in Hertford

The Yellow House in Hertford was an extensive restoration of pine floors throughout a large Georgian home. Many boards needed fixing and repairs before sanding could begin, with the aim of keeping the character of the old timber while giving the floors a natural, light finish. The images below show the floor during the coating process.

Once the repairs were complete, we sanded the boards progressively, applied a shellac sealer and finished with Bona Mega matt floor lacquer. The result retains the grain, knots and individual marks that make these period floors part of the house.

Lifting some boards also revealed an unexpected time capsule: a well-preserved Tango Orange can and an empty crisp packet, apparently left by a tradesperson after lunch in the early 1980s. It was a small glimpse of an earlier chapter in a thoroughly rewarding restoration.

Matching old and newer pine floors in Wanstead

This Victorian home in Wanstead had original pine floorboards at the front of the kitchen and newer boards at the rear, where the house had been extended. The later boards were noticeably lighter, so the challenge was to bring the two areas together.

After sanding, we toned down the newer pine to achieve a closer match to the original floor. Careful colour matching helped the kitchen read as one continuous space while retaining the grain, knots and natural differences between the boards.

We finished the floor with three coats of Bona Mega floor lacquer, protecting the timber and bringing a consistent finish across the original kitchen and the later extension.

Solid oak floor restoration in Finchley

This solid oak floor in Finchley had some heavily marked areas that needed particular attention. The marks may have been caused by water, but the cause was uncertain; the task was to see how much could be removed through careful sanding.

An initial coarse sanding stage removed the damaged surface and eliminated the marks. We then worked through progressively finer abrasives to prepare the oak for coating, revealing the grain and natural colour of the boards.

Bona Mega matt floor lacquer completed the restoration, giving the floor a protective finish with a soft sheen. The finished photographs show the restored oak across the room and in closer detail.

Oak parquet restoration in Docklands, E14

This oak herringbone parquet floor was restored in a home near Docklands, London E14. Some damaged blocks needed replacing, and a timber threshold supplied by the customer was fitted beside the glazed doors before the sanding work was completed.

With the repairs in place, we sanded the parquet progressively to remove the old finish and prepare the blocks for coating. The changing direction of the grain is part of the appeal of herringbone, and careful sanding brings that pattern back into focus.

Bona Mega Matt floor lacquer completed the restoration. The finished photographs show the oak across the room, closer views of the parquet grain and the threshold detail at the doors.

Engineered oak floor restoration in Hoddesdon

This engineered oak floor in Hoddesdon, Hertfordshire, had previously been oiled and was showing the effects of everyday wear. The customer wanted to retain a natural appearance while moving to a more durable lacquered finish.

​

We sanded the floor to remove the old finish and prepare the oak for coating, then applied a shellac sealer to enhance the grain and bring out the timber’s natural character.

​

Three coats of Bona Mega matt floor lacquer completed the restoration, giving the oak a durable protective finish with a soft sheen. The photographs show the transformation and closer views of the restored grain.

bottom of page